This will help us understand if the problem is a drive problem or a system problem. In addition, if another drive is available, check this drive in the same system. If the problem persists, then the cable was not the cause of the problem. If it still doesn't work try to replace it with another cable.

SATA connections are pretty gentle and might sometimes fall out their connections.Ī good way to test a cable is re-plug it into the system and into the drive.

In case of damaged SATA cables or connection the BIOS will not detect the drive. Step 2 Once you've entered the BIOS settings, use the arrow keys to select Advanced BIOS. The system tells you what key to press during the restart, so pay. Step 1 Restart your computer and press F8 or Del key to enter the BIOS settings. In case there is no drive letter on freshly flashed HDD or SSD, follow the steps described here. Edit the config.js file and add your access key and workers name or replace it with the config.js you downloaded from your minerstat dashboard. SOLUTION - Problems in cables and connections: Format Hard Drive on Windows 7 or Earlier Versions. When the system asks you if you want to format, click No or Cancel. In the sample below you can see how it is possible to enable or disable every SATA port by putting it OFF or ON. When you add a drive to the system, it may be needed to enable the port by turning it ON in System Setup. If your drive is NOT detected it may be because it is turned OFF in System Setup. There are few reasons for not detecting a drive in the BIOS: SOLUTION - Drive is not detected by the BIOS: In some cases the BIOS will display the drive model number while in other cases it will only indicate the existence of a drive and its capacity.

In most cases the SSD will be automatically detected by the BIOS. SOLUTION - Detecting the drive in the BIOS: Sometimes it's not one of the Function keys, but the Delete or ESC keys.įor the most up to date information about your BIOS, please look for information provided by the BIOS manufacturer or the SATA controller manufacturer. It usually requires the push of a function key, such as F1, F2 or F10, to get access to it. The BIOS can normally be accessed when you start your computer. The initial function of the BIOS is to identify, test, and initialize system devices such as the video display card, hard disk, USB devices and other hardware. The BIOS is system software embedded inside your computer that helps the computer to start up and to set most of its hardware peripherals.

How to format ssd from bios